SGM 1400℃高温推拉式台车是由洛阳西格马高温电炉生产的高温电阻炉，高温推拉式台车炉外壳由焊接钢板和型钢制成。台车由型钢和钢板焊接而成。台车与炉衬和砂封结构保持着柔和的接触，以减少热辐射和对流损失，并有效地确保炉体的密封。风扇由鼓风机和导风板组成。鼓风机电机和加热元件电气互锁。仅当鼓风机打开时，加热元件才通电，这可以确保加热元件在通风循环的条件下可以工作。炉衬：炉体部分由全纤维制成，根据炉子的尺寸将其制成模块，然后将其压缩成块，用于现场棉纺。然后用钩钉钩住穿刺销，拧紧后将其与炉体焊接。推车的耐压部分使用高压砖，下部用隔热砖绝缘。

SGM 1400 ℃ high temperature push-pull trolley is a high-temperature resistance furnace proced by Luoyang sigma high-temperature electric furnace. The shell of high-temperature push-pull trolley furnace is made of welded steel plate and section steel. The trolley is welded by section steel and steel plate. The trolley keeps soft contact with furnace lining and sand seal structure to rece heat radiation and convection loss and effectively ensure furnace body sealing. The fan is composed of blower and guide plate. The blower motor and heating element are electrically interlocked. The heating element is energized only when the blower is turned on, which ensures that the heating element can work under the condition of ventilation circulation. Furnace lining: the furnace body is made of whole fiber, which is made into moles according to the size of furnace, and then compressed into blocks for cotton spinning on site. After that, it is welded with the hook pin of the furnace. The pressure resistant part of the trolley is made of high-pressure bricks, and the lower part is insulated with insulating bricks.

高温推拉式台车炉特点：

Features of high temperature push-pull trolley hearth furnace:

双层炉壳结构稳定，炉壳外表温度低

The structure of double shell is stable and the temperature of shell surface is low

质耐腐蚀性强的质1500型多晶氧化铝陶瓷纤维板

High quality 1500 polycrystalline alumina ceramic fiberboard with high corrosion resistance

特殊的拱形炉顶设计，经久耐用、不垮塌

Special arched furnace top design, rable, no collapse

侧开门，易于样品装载，可加装通气口，可在氧气或惰性气氛下操作壳体结构

Side door, easy to load sample, can be equipped with vent, can operate the shell structure in oxygen or inert atmosphere

台车底部装有轨道，可方便台车的推拉(台车承重>1T)

The bottom of the trolley is equipped with a track, which is convenient for pushing and pulling the trolley (trolley bearing capacity > 1t)

两侧加热确保高度均匀的温度分布（保护气操作作为额外配置）

Heating on both sides ensures a highly uniform temperature distribution (protective gas operation as an additional configuration)

炉膛内部温度稳定度<±5℃

Internal temperature stability of furnace is less than ± 5 ℃

静音电子继电器

Silent electronic relay

超温报警并断电，漏电保护，操作安全可靠

Over temperature alarm and power off, leakage protection, safe and reliable operation

标准配置数字式PID控制器，可调节升温曲线、保温温度和保温时间

Standard configuration of digital PID controller, adjustable heating curve, holding temperature and holding time

高温推拉式台车炉参数：

Parameters of high temperature push-pull trolley hearth furnace:

1、电炉名称：高温推拉式台车炉

Electric furnace Name: high temperature push-pull trolley furnace

2、炉膛尺寸：1000×1000×1000mm(可定制)

Furnace size: 1000 × 1000 × 1000mm (customizable)

3、炉膛容积：1M3

 Furnace volume: 1m3

4、设计温度：1400℃(可定制)

 Design temperature: 1400 ℃ (customizable)

5、控温精度±1℃

Temperature control accuracy ± 1 ℃

6、均温性：垂直温度8℃

Homogeneity: vertical temperature 8 ℃

7、升温速度：≤15℃/min

Heating rate: ≤ 15 ℃ / min

8、加热元件：硅碳棒

Heating element: silicon carbide rod

10、控温方式：采用微电脑全自动智能调节技术，具有PID调节、模块控制、自整定功能，多段程序编程，并可编制各种升温、保温、降温程序。控温精度高；集成模块可控硅控制、移相触发、保护系统；采用立超温保护、超压、超流、漏电、短路等保护，自动化程度高。

Temperature control mode: using microcomputer automatic intelligent adjustment technology, with PID regulation, mole control, self-tuning function, multi-stage programming, and can program various heating, heat preservation, cooling programs. High temperature control precision; integrated mole thyristor control, phase shift trigger, protection system; independent over temperature protection, overpressure, over current, leakage, short circuit and other protection, with high degree of automation.

11、分度系数：一点控温、三点测温。

Division coefficient: one point temperature control, three points temperature measurement.

12. 加热方位；四面加热

Heating direction; four sides heating

13、数据存取：无纸记录仪，实时调取历史工艺。

 Data access: paperless recorder, real-time access to historical technology.

14、罐门设有观察窗口，便于观察工件实时状态，可用红外线仪外部测温。

The tank door is equipped with an observation window, which is convenient to observe the real-time state of the workpiece. The infrared instrument can be used for external temperature measurement.

15、箱体材料：质碳钢冷板、表面喷塑处理、公司标准色。

Box material: high quality carbon steel cold plate, surface spray treatment, company standard color.

16、进出料：耐高温钢台车

Feeding and discharging: high temperature resistant steel trolley

17，立配电柜

independent power distribution cabinet

18、总功率：200KW

Total power: 200kW

19、电源电源:50Hz-380V

Power supply: 50 hz-380v

洛阳西格马高温电炉可生产推拉炉、高温台车炉、双车台车炉。

Luoyang sigma high temperature electric furnace can proce push-pull furnace, high-temperature trolley furnace and double trolley furnace.