电炉名称

Furnace name

2200℃真空碳管烧结炉

2200 ℃ vacuum carbon tube sintering furnace

主要参数

parameter

额定功率：210KW

rated power: 210Kw

电源电压：三相380V

power supply voltage: three phase 380V

额定电压：0-36V

rated voltage: 0-36v

额定温度：2200℃

rated temperature: 2200 ℃

极限真空度：6.67×10-3Pa

limit vacuum degree: 6.67 × 10-3pa

工作区尺寸：Ф320×320

working area size: Ф 320 × 320

控温精度：±2℃

temperature control accuracy: ± 2 ℃

压升率：≤2Pa/小时

Pressure rise rate: ≤ 2PA / h

保护气氛：Ar，N2

protective atmosphere: AR, N2

炉体结构

真空系统：采用壹台TK-200油扩散泵、壹台2X-30机械泵（配电磁放气阀），及高低挡板式真空阀等组成。机组上安置了破坏真空时用的放气阀。真空度的测量采用数显热偶、电离复合真空计。

Vacuum system: a tk-200 oil diffusion pump, a 2x-30 mechanical pump (with electromagnetic vent valve) and high and low baffle vacuum valve are usedThe unit is equipped with a vent valve for breaking vacuumThe vacuum degree was measured by digital thermocouple and ionization combined vacuum gauge.

.设备还设有充保护气氛下的自动烧结等功能，安全阀的安装保护防止一旦炉压过高情况下的自动排气功能。

The equipment is also equipped with automatic sintering function under protective atmosphere, and the installation and protection of safety valve can prevent automatic exhaust function in case of high furnace pressure.

.电气系统：主回路采用可控硅调压器调节初级电流，再经过大电流变压器降压后，经电缆（或铜排）送到炉体的电极上，电极联接加热体实现加热。

Electrical system: the primary current is regulated by thyristor voltage regulator in the main circuit, and then it is sent to the electrode of the furnace body through the cable (or copper bar) after the voltage is reced through the high current transformer, and the electrode is connected with the heating body to realize heating.

.控制柜体为威图标准柜，顶部排风内设自动照明，柜门密封条等功能。控制回路主要由壹台欧姆龙PLC配合相应的中间继电器等实现控制，控制回路设有过热、过流、短路、过载保护及超温报警保护功能。

The control cabinet is Rittal standard cabinet with automatic lighting and cabinet door sealing strip inside the top exhaust airThe control circuit is mainly controlled by an OMRON PLC with corresponding intermediate relayThe control circuit is equipped with overheating, over-current, short circuit, overload protection and over temperature alarm protection functions.

.本设备配有一台工业控制计算机，标配是19寸液晶显示器，主机迅驰二代CPU，2G内存，500G硬盘。安装本公司开发的操作软件，能实现烧结过程各参数的监控，报警诊断，数据库采集及实时曲线显示等功能

This equipment is equipped with an instrial control computerThe standard configuration is a 19 inch LCD, the main unit is Centrino second generation CPU, 2G memory and 500g hard diskThe installation of the operation software developed by our company can realize the monitoring, alarm diagnosis, database acquisition and real-time curve display of various parameters in sintering process

供货范围

真空碳管炉炉体

vacuum carbon tube furnace body

真空系统

vacuum system

数显复合真空计

digital composite vacuum gauge

大电流变压器

high current transformer

配工业控制计算机的电控柜

electric control cabinet with instrial control computer    

保修期

一年保修，终身技术支持